Valve hardfacing | Valve Hardfacing Machine | Plasma welding machine
Valve hardfacing machine can be used as a jig for shafts and bores, and with the operating machine, it can be programmed to strengthen and repair plasma surfacing for specific parts.
Suitable for general shaft parts, tube parts of the outer round, bore and end face of the wear layer welding and repair of damaged surfaces. It can also be used for surface surfacing and repair of disk parts.
CNC weld overlay machine features: small transmission gap, high rigidity, stable and reliable operation, convenient integration.
Features: HV1700 welding manipulator adopts imported linear guide rail, precision worm gear reducer and stepping motor to drive walking. The machine features small transmission gap, high rigidity, stable and reliable operation and convenient integration.
The unique design of HBT-6 through-hole welding displacement machine is suitable for the surfacing operation on the internal and external circular surface of various long shaft parts. Equipped with a servo motor to drive the slewing bearing to achieve precision transmission of the spindle, small clearance, high rotational precision, convenient control.
|Item||Model and Brand||Main parameters|
|Transverse Mechanism Motor||YZM stepper motors||Effective stroke 1000mm|
|Lifting Column Motor||YZM stepper motors||Effective stroke 700mm|
|Spindle rotation motor||Servo Motor||Rotational speed 0.01r/min~2.5r/min|
|Welding Positioner||HBT-06||Rated load 600KG|
|Welding Oscillator||K11-500C||Swing speed 1~30mm/s|
Swing distance 3~60mm
|Three-jaw chuck||K11-320C||Clamping range 25~320mm|
|Arc Pressure Tracking||WALDUN|
|Current communication||485 communications|
|Touchscreens||Wellbutton||7″ screen TK6071IQ|
|Control system||Mitsubishi of Japan||FX Series PLC|
|Control table||WALDUN||Moveable control table, remote control|
Ordering a valve hardfacing machine from WALDUN
In some cases, we can modify your equipment to incorporate these liner plates when not in the original equipment design. If your equipment has lost some efficiency or does not hold the same tolerances as new, inspect the worn parts. There could be an easy and cost effective fix to the problem.