1000W handheld laser welding machine is straightforward procedure, attractive welding joint, quick welding rate, as well as no consumables. Welding in slim stainless-steel plate, iron plate, light weight aluminum plate, and also various other steel product.
Can completely change the standard argon arc welding and also electrical welding equipment.
1000W handheld laser welding machine Application:
Railings of stairs and elevator , shelves, oven, stainless steel guardrail， electrical box, stainless steel home supplies, kitchen ware, electrical energy, furniture, car manufacturer, tool& machinery, military, ship industries etc.
1000W handheld laser welder Material and welding thickness:
1000W handheld laser welding machine Advantages of laser welding machine：
ความยืดหยุ่น： it’s suitable to weld any shaped products
the welding speed is 2-10 times faster than the traditional welding processing speed • •compatible with a wide range of models, and short changeover times
High welding quality:
no distortion, no welding scar, and very strong
Welding seam surface smooth and beautiful, no need to make further grinding processing, save time and cost
Modular compact design with less layout space, beautiful and easy to maintain and commissioning;
Simple operation: the operator will get started quickly even without any experience.
1000W handheld laser welding machine Spare parts with machine
A type, B type
pressure regulating valve
1000W handheld laser welding machine Introduction of main components
The Reci FSC series of high-power single-mode continuous fiber lasers are independently developed and produced by Reci, and are solved by solving the mode instability (TMI) and stimulated Raman scattering(SRS) that limit the average power of high-power single-mode fiber lasers. Bottleneck problems such as (SRS) and poor beam quality have increased the average output power of single-cavity and single-transverse mode lasers to 3000W. This series of products combines high average power, multiple anti-high anti-reflection, high-quality beam quality and high electro-optical conversion efficiency.
It can be widely used in many places such as fine cutting, metal welding, surface treatment, 3D printing and rapid prototyping. Especially when cutting thick metal plates, not only the cutting speed is fast, but also the plate slits are thin and the section is bright, which is obviously superior to other lasers of the same type on the market.
Flat, upright (avoid inversion or side), no significant vibration and shock
QBH cooling water temperature
At room temperature, too low cooling water temperature will cause QBH condensation
Cooling water temperature
>12L/min（FSC 1000）、>20L/min（FSC 1500）
Cooling water quality
QBH and the whole machine cooling water need to use deionized water to prevent scaling, in the absence of going
In the case of deionized water, deionized drinking pure water can be used.
Dry inside the chassis
Dry air prevents laser when ambient temperature exceeds 30 ° C and humidity is greater than 50%
Avoid excessive electromagnetic interference, which may cause false alarm of laser under strong electromagnetic interference
The water cooling system consists of an internal circulation system and an external circulation system. The internal circulation system is self-contained by the laser, and the external circulation system uses a laser-specific water-cooling unit to ensure long-term stable operation of the laser.
This product adopts high-performance controller as the main control device, featuring beautiful structure, high reliability and strong anti-interference. The whole machine is compact in structure, small in volume and high in mechanical strength. Good cooling performance and high efficiency.
Main parameters of chiller：
Maximum lift 49L/min
Water tank volume
Welding head and control system
SUP20S is a hand-held welded cutting head introduced in 2020. The product covers a handheld welding gun and an independent developed control system, along with multiple safety alarms and active safety power outage and lighting settings. The product is suitable for various brand-based fiber lasers; the optimized optical and water cooling design allows the laser head to work steadily for a long time at 2000W.
Basic characteristics: the self-developed control system, set up multiple safety alarms, smaller volume, flexible operation, easy to start.
More stable: all parameters can be visible, monitor the state of the whole machine in real time, avoid problems in advance, more convenient to investigate and solve problems, to ensure the stable operation of the cutting head.
Process: All parametersbe seen, perfect welding quality, small deformation and high melting depth
1000W handheld laser welder Product parameter
Suitable for the
Collimation of the focus length
Focus focal focus
Maximum support pressure
Vertical focus range
Light spot adjustment range
Welding head maintenance
The processing characteristics of laser welder requires regular maintenance. If the protection lens is serious burning, the protective lens shall be replaced.
Lens cleaning technology is extremely important, cleaning is not good lightlyleads to decreased lens performance, heavilyleads to lens damage. So be sure to be very careful when cleaning the lenses.
Before cleaning, prepare the balloon ,dust-proof non-adhesive tape, water-free skim cotton (fine cotton), more than 99% industrial alcohol, finger cover or rubber gloves, mirror paper.