Bimetallic wear plate
Bimetallic wear plate is an overlay weld resistant to the formation of a wear-resistant layer based on Cr7C3 carbide with a volume fraction of 50% or more on a common steel plate (Q235(A3) or heat-resistant steel (15CrMo, 12Cr1MoV, etc.) or stainless steel plate.
Bimetallic wear plate has high wear resistance, impact resistance, deformable and weldable performance characteristics, like steel plates can be directly rolled plate deformation, cutting and punching and other processes, processing into wear-resistant parts.
WALDUN Bimetallic Wear Plate
All Bimetallic Wear Plate can get 1200X2400, 1500X3000, 2200X3000(Length X Width). You can contact us if you need customized size.
WALDUN Bimetallic Wear Plate is using plasma torch, water jet or arc air gouging tp cut to dimensions.
You can get customize plate size or pattern to meet the projects.
Customer Benefits:
- Saving fitting and welding of smaller and special pieces
- Get maximum capacity and increase efficiency
- Reduced scrapto save total cost
- Precise measurement and fit
6+4 Bimetallic Wear Plate
Hardness: HRC58-62
Model Number: WED-100/6+4
Grade: Q235/Q345
Processing: FCAW
12+25 Bimetallic Wear Plate
Hardness: HRC58-62
Model Number: WED-100/12+25
Grade: Q235/Q345
Processing: FCAW
3+3 Bimetallic Wear Plate
Hardness: HRC58-62
Model Number: WED-100/3+3
Grade: Q235/Q345
Processing: FCAW
6+6 Bimetallic Wear Plate
Hardness: HRC58-62
Model Number: WED-100/6+6
Grade: Q235/Q345
Processing: FCAW
8+6 Bimetallic Wear Plate
Hardness: HRC58-62
Model Number: WED-100/8+6
Grade: Q235/Q345
Processing: FCAW
10+10 Bimetallic Wear Plate
Hardness: HRC58-62
Model Number: WED-100/10+10
Grade: Q235/Q345
Processing: FCAW
Note:Format is base material + hardfacing layer. You can contact us for a inquiry, if you need other sizes.
WALDUN Bimetallic Wear Plate Video
Why WALDUN Bimetallic Wear Plate
- Higher chromium content in the chemical composition of wear-resistant layer
- Higher volume fraction of Cr7C3 carbide in metallographic structure
- Wear-resistant layer is high and uniform, hardness can reach HRC60-65
- Wear-resistant layer is uniform and the tolerance is controlled between 0 ~ 0.5 mm
- The flatness and flatness of the plate surface areat 3mm/M
- Wear resistance is much higher than heat treatment wear plate.